Materials to make disposable masks
Materials to make disposable masks
Materials to make disposable masks. This article lists what materials you need to produce disposable masks. Quality of materials is crucial to make qualified masks. The maker should guarantee the quality of materials to meet the requirement of local government or laws. In addition, the workshop and euipment making mask has much restrict requirement if producing “medical grade” masks, so the market should consult with local government or experts before starting to make masks.
What materials are needed to produce disposable masks?
A. SS non-woven dark color-outer layer
- Material weight 25g/square
- Material width 200MM
- Each piece is cut to length 175MM
- Single chip weight 0.875G
Remarks: green, blue, black, etc.
B. Meltblown non-woven fabric-filter layer
- Material weight 22 grams/square
- Material width 180MM
- Each piece is cut to length 175MM
- Single piece weight 0.693G
Remarks: filter index 90%, 95%, 99.99% can be selected according to the production requirements of the enterprise, width 175MM can also be used
C. SS non-woven fabric light color or white-for inner layer
- Material weight 25g/square
- Material width 210MM
- Each piece is cut to length 175MM
- Single chip weight 0.91875G
Remarks: 20 grams can be used, but the overall mask is soft
D. nose strip
1. Each piece is cut to length 100MM
Remarks: Plastic or iron, it is recommended to use plastic with iron wire, which is quite strong
E. elastic ear straps
1. Each piece is cut to length 300MM
Remarks: 150MM*2 side=300MM on one side
Attention:
The above mentioned just for reference, it’s better to contact an expert before making masks, also under local regulations or laws, especially to make “medical grade” masks.
